You are currently browsing the category archive for the ‘Film Work’ category.

I’ve been on a roll for quite some time now.  I’m not even sure how long it’s been… since pilot season I guess.  That would be last spring.  In my estimation, I’ve had approximately 11 days off since then. Today is not supposed to be one of them and I’ll likely start working right after I’m finished writing this, but, for now, I’m calling it a day off.

What does a person who works that many hours do on a day off? Glad you asked. 

I’m one of those crazy seamstresses who likes to use a rolling office chair at the machines. That way I can roll back and forth between machines to save time. It’s all about saving time you see. So, when the rolling begins to become more like work, I know I have to take some action and do some cleaning. Don’t get me wrong… I sweep my workshop out at least once a day and sometimes 2 or 3 times a day, depending on what the project is. I vacuum the entire shop at least once a week as well. I like a clean shop.  

Why refer to myself as a ‘crazy’ seamstress?  It’s the wheels…  the thread of a thousand garments is wrapped around each of the five wheels, binding them in place and making it impossible to roll any longer. What shall I do? 

Actually it’s not like I haven’t cleaned the caster before… I do it about once every 8-12 months…I think…. I don’t know… I lose track of time.

Today I have a window of opportunity…. I seize the moment, hoist my chair up onto my table and begin to hammer the casters of with my rubber mallet. Five in all, giving them a cursory inspection, I find that they’re worse than I had anticipated. 

                                                         

CostumePeople casters

Thread Stuffed Casters

This would call for the ‘caster de-threading tool kit!!

Caster De-Threading Tool Kit

Caster De-Threading Tool Kit

I took everything out to the back porch, where I began to work away at each wheel. First with the razor blade, then the pliers, and exacto knife.

Jammed Caster

Jammed Caster

Exacto Knife in Action

Exacto Knife in Action

I just kept jamming the knife in along the side and pried it upward to cut the threads, then I gently pulled the threads out. If you pull too hard the thread wraps tighter and is tougher to get out.  When you finally get it all out, you can use a lighter to burn out the last few threads.

Use a  lighter to burn/melt out the last bits of threads.

Use a lighter to burn/melt out the last bits of threads.

I was finally finished…

Five clean casters

Five clean casters

Can you believe the amount of thread I got out of these five casters? Amazing, right?  Ahhh… brings back memories…

Mound of thread removed from wheels

Mound of thread removed from wheels

I hammered the caster back into the chair legs and my faithful rolling chair is ready for action… which I’m about to take, by starting another project right NOW!

Back on my roll!

Back on my roll!

Advertisements

A wee bit of catch up to do here I’m afraid. First off, in my own defence, I’ve worked on average 75 hours per week since my last blog post. To put it in perspective, that’s more than twice what the average person works in a week. When I work an eight hour day, I feel like I’m getting off at lunch time. So, think about it… what does that leave time for? Well, I have to sit down and pay bills, make invoices, go to the bank, and get groceries. I have to make meals for my daughter and I, clean up after, feed my cat, do laundry, and vacuum. I have to shower, dress, sleep and do pilates. I have to fill Buggy Bag orders, tweet and post to the Buggy Bag fb page. Yeah… you get the idea…there’s not been a whole lot of time left to blog! I’ve been off now for 2 weeks. Some of that time was spent recuperating from the last 5 months. Some of it was spent blowing off steam with my friends. I went to the Cloverdale Rodeo, several parties and over to the island for a night.

I’ve sold out of Large size Black Lap Blankets! I’ve put in a new PO with the factory and should be receiving the new shipment by September, just in time for the cold weather.  Toys ‘R’ Us (.ca) has increased their re-oder amount steadily since they took on the stroller and jogger blankets, so that’s good news for me, however, I still can’t for the life of me find the product through any search on their site!!! I wonder how they’re selling them.

I missed the Abilities Expo at the Roundhouse this year because I was working on a movie, which upset me, because I really enjoy that event.  I did get to go to the Recreational Resource Fair at GF Strong

though, which was really fun. The pic above is of David from Vivify. It was nice to see his big smile from where I was sitting this year. I also, had a great chat with the author of a blog called Priority Seating. Check it out.

I have done more than that, obviously, but, it’s past my bedtime, so, that’ll be for another day.

I’ve been having a really hard time posting anything lately…. I’m always trying to keep it ‘light’ and ‘positive’, so when times are tough, I find myself with very little to say.

Time to lay it all out there… to bare my soul, as they say, or as close as I can get to that.

Last Christmas, my daughter and I kept a really low profile. We stayed home by ourselves. We went out for dinner one night and saw a movie with coupons someone had given us. We put up our tree and enjoyed our new little kitten, who entertained us by running up the centre of the tree, over and over again.

As this year winds down, I’m asking myself, how the heck I ended up here… more broke than last Christmas, wondering how on earth I’m going to pay my rent.  I feel like I worked every second last year and really didn’t have time to even stop to evaluate my finances. I just had to keep moving ahead with my goals with little time to stop and reflect on my personal situation.

I’m just going to start by trying to remember all the things that I did accomplish or put into action.

In the fall of 2009, I started working with Teresa, from Blacklake, who I’ve been working with ever since to establish quality manufacturing for a price that would make it possible to start selling Buggy Bag® at wholesale to retailers.  The manufacturing costs here made the price untouchable at that level, so I was only able to sell  the product one at a time, directly to end users… I wanted more people to be able to find it and use it.

The year 2010 started out with work for the movie ‘A-Team‘, going to a local theatre to fix a velvet stage curtain, and the construction of some Fencing Jackets for the Arts Club Theatre.

Much work with Rina from Liddleworks, and a photo shoot with the lovely Jessie Claveau for our new flyer which Rina designed.

Got my first set of samples back from Hong Kong. They looked pretty good, but, I wanted to make some changes to the fabrics, and components, and see what the prices would be like….shipping costs $350

My generous friends took my daughter and I to Whistler for Easter weekend where I was able to prove to my self that I could still ski. That weekend was such fun!

Went to the Dragon’s Den auditions and was told I didn’t have enough sales to move ahead. That was fine, and it was a benefit to me to work on the numbers etc. with Rina before hand. These exercises always shed light on the value of planning ahead and setting goals. My friend Wendy from PumpEase made it through the auditions, and onto the show which aired in October.

I was contacted by LandMark Direct, who do TV commercials like the ‘As Seen On TV’ ads. I decided to have them make a 1 minute commercial for me that would run in 150 spots across the US. The purpose being to test the market to evaluate where advertising $ are best spent. I sent some samples of the Stroller, Jogger and Wheelchair weather blankets, and the process began.

Received another round of samples from the factory … shipping $340

I met with the SCISN Board for the Rick Hansen Institute where I met with Gary McPherson about designing some custom wheelchair weather protection for him. I made a few sales there and met some lovely and inspiring people. It was through my work for former Vancouver mayer Sam Sullivan, that I ended up there. I had done a custom wheelchair poncho for him in the fall of 2009.

I did a bit of work for a friend who had a contract to do some costumes for the Olympics. Then, an old school friend of mine moved back here from Singapore. She needed a place to land while she settled back into the Vancouver workplace and found a place to live. It was really nice having Kai here for that time and we had many fun times and good meals together. We went to many free Olympic festivities. It was really fun being in Vancouver at that time!

I shortened many, many sleeves for a TV show called ‘Human Target‘, did some pattern work for two local women’s wear designers, then I headed over to my friend Deb’s studio to help her with a bunch of gaberdine 50’s styles she was manufacturing for a TV show called ‘Fringe‘. I think I spent a few weeks over there. Nice to get out of my place… even though my place is like heaven, I still get lonely… I know I talked her ear off… I miss working with people.

Got another set of samples back, decided to focus on just the three main products for now, because of the minimum order quantities. The zippers and fabrics now looked good, but we still have to work on the reflective logo…. shipping costs $275

Found a US Patent and Trademark Lawyer and started to proceed with this process…$2500 later, I find out that even though, I have the trademark Buggy Bag Registered here in Canada and have owned the buggybag.com address since 1998, and I make and sell mobility accessories…. they feel that there will be some ‘confusion’ with the other company that makes shopping cart covers and uses my name only with an extra “g” on the end….I should have applied for the US TM back when this company first offered to buy my URL…. who knew they would just add another ‘g’ to the name. The patent is still in process… and the cost is unknown, but a fair guess would land it in the $10,000 range.

Had Lawyers read contract with Landmark Direct… $500

Found out I need some very pricey licences to be able to sell a ‘stuffed’ article in Ontario, Quebec or Manitoba. One for each province and for each year at $500 each! Ouch, there goes my rent for that month.

Next, I stumbled across a blog written by the mom of a beautiful little guy by the knick-name of Bugg. I was moved by her ability to document their life and the wonderful quality of her blog photos. http://thebuggslife.blogspot.com/ I sent this little guy a Buggy Bag Stroller Blanket to use on his tiny wheelchair. I was so happy to meet this family and help make Bugg’s outings a bit cozier. We still keep in touch and I hope to one day meet them in person.

I then built some leather dresses for the character ‘Ginn’ on ‘Stragate Universe‘, and started working on another dog movie called ‘Treasure Buddies‘ featuring lots of cute children’s costumes, and also squeezed in an alteration of a down jacket for the movie ‘The Big Year‘, hemmed some shirts for ‘Ice Road Terror‘, and a bunch more custom work for ‘Stargate Universe’.

Got some more manufacturer samples still with issues …. shipping $400

It was around this time that I met a great guy by the name of Brian Bell, the founder of Interfit in North Vancouver. Some friends and I went to their fundraiser, which I also blogged about.

Got many different script revisions over this time and finally approved one and then had to get the money together before the commercial production could begin…. $3000

I made 9 pairs double layer fleece leg warmers for Sam Sullivan to give out to his associates, the moved onto yet more alterations for ‘The Big Year’, much more work for ‘Stargate Universe’ and the leather coat I made for ‘Sanctuary‘, which I also blogged about. It was right around this time that I got the sad news that Gary McPherson had passed away.

More one on one work with Liddleworks… business plan.

Got a first copy of the actual commercial. It looked great and I was really happy with how our conversations went. I was so apprehensive about the whole thing to begin with and the amount of $, but, if everything went well we would be getting lots of sales and valuable information about the marketplace, not to mention the commercial to use in whatever way we liked…$3500

More work with Liddleworks… hangtag designs…. three tags with usage illustrations. Had a friend help with the french translations and found a hangtag manufacturer close to the factory in China.

I made a dozen various aprons for ‘Red Riding Hood‘ before starting on the years fun show…. ‘The Fairly Odd Parents’ I always have fun working for Angus Strathie and this show was no exception! Many wonderful costumes for this show.

More work on business plan…more $$$ I owe Liddleworks.

Right after that I had the pleasure of meeting Jim Byrnes and making him a pair of trousers and an overcoat for ‘Sanctuary’.

A man I  spent two years trying to forget, suddenly appears in my life again, only to vanish again two months later.

Another photo shoot featuring 5 wheelchair models and one stroller model, a mom and a sweet working dog…$600

Pay for hang tags… $1100

September finally rolled around, the commercial was ready to air, the production was in place and would be ready to ship at the end of Sept. I had to decide where to have the product shipped to, and decided that most of the sales would likely be from the US, so I found a ‘pick and pack’ place in Blaine.

Volunteered at the World Wheelchair Rugby Championships. So fun, met lots of athletes and got to see some of the games.

Commercial aired to no sales and therefore no stats… frustrating, but, must keep looking ahead.

Landmark proposed an agreement to sell the product through catalogue sales.

Lawyer read another contract…. $500.

Chris, my brother and I head down to the ABC Kids show in Vegas to see what the competition is like, what to expect when we go to the show as a vendor, evaluate what kind of a booth we need,  to look for sales reps and get a bit of R&R. We walked hundreds of miles that week and most of it was in the convention centre. We also, visited just about every hotel in the  city, we won $76, and we had some fantastic meals.

Launched new version of the Web Site that has been in the works for many months… it looks great and it’s only Phase I! Was immediately “de-friended” on facebook by the fellow that did the last version of the website.

Went on a sailing trip to Molly’s Reach with some friends, which was another stellar weekend!

Product is ready to ship, need to get financing… bank turned me down… evidently I should have bought an apartment instead of trying to make this great product available… at least that’s what they would have me believe!

Went to a private investor, who saw the real reason I’m doing all of this and wants to help make it happen…. $17,000 debt

Landed the product in Canada and the US and took delivery the same day that we had our Buggy Bag reception for friends, customers and media…$550. Had a blast even though no media showed up, the important people were there. Including David Rountree, who I met when I volunteered at the World Wheelchair Rugby Championships back in September. He brought his ‘Floor-Board‘ for all of us to try. Sylvi MacCormac was a special musical guest at our event, who was also one of our models at the last shoot. We felt so honoured.

Inspected the shipment that arrived here in my living room with Teresa from Blacklake. We realized there was a small QC issue with the shipment and had to look at our options…. do we send them back? I’m totally against that idea. I try a few different methods to deal with the issue and discover that I can solve it 100% with the use of my commercial iron.

One of the perks of working in film is the ‘wrap party’ at the end of the show. I went to 4 wrap parties and a gala benefit for Spinal Cord  Injury. I wore the same outfit to 3 of them!

Got an order for the stroller and jogger blanket from Babies’R’Us… a small trial order for the Canadian web site.

Had to buy a Universal Bar Code number for the company… $500

Dear friend Barbara passed away, which left me in a blue funk for some time. Sadly missed.

More work for  the TV shows ‘Stargate Universe’ and ‘V‘.

Teresa and I head down to the States to deal with the QC issue on that part of the shipment. One day and two very sore backs later and we are back in Vancouver, satisfied that the product is 100% perfect.

December rolled around with no movie or tv work for me, so I started making phone calls. I always said I wasn’t a sales person, but, one call led to another and another and by mid December I had already shown the wheelchair weather blanket to at least 7 places and got it into 4 stores and 10 locations in the lower mainland. This is the easiest thing in the world to sell. It just makes sense because it’s easy to use and  it helps people stay warm. I’ve been focusing on the  wheelchair weather blanket, but, also got the jogger weather blanket into two stores as well.

I read a blog that really touched me and I responded by sending a wheelchair lap blanket to the autor, Patrick, for his wife Patti. The response I got was worth every bit of the hard work I’ve done this year!

I put 2 paid ads on Craig’s List one in Seattle area and one in NYC, looking for commissioned sales reps to rep the wheelchair weather blanket… $50. There may be a few potentials among the responses… I sure hope so. And it looks like I may have a rep in the Chicago area, who is a friend of Teresa’s…. Yeah!

Ok… now it makes sense!  As a single mom, with no financial help from anywhere, I’m just getting deeper and deeper in debt. This year of business has cost a lot. I’m financing my business with my income from film work, my lines of credit and those kind enough to help me.  My coffee maker, my kettle, my watch, a computer, and my hair dryer have all become incapacitated in the last couple of months… not sure if I’m just noticing all of this because I can’t fix or replace them at the moment….but, it just adds to my anxiety levels. I have to keep reminding myself of the quote I put up on my facebook wall a while back:

‎”I do not think that there is any other quality so essential to success of any kind as the quality of perseverance. It overcomes almost everything, even nature.” — John D. Rockefeller

I sure hope that’s true… because my intention is to keep on keeping on, no matter what, because I believe that it is the right thing to do, and to continue to count my blessings.

This year I:

posted 171 times on the facebook fan page….

tweeted 684 times….

wrote 28 blog posts….

responded to 479 emails about the offshore production….

did work for 16 different production companies

responded to 275 emails from Liddleworks….

added a store front to my FB page as a way to sell old stock…

had 750 Buggy Bag units manufactured

took 49 guitar lessons….

spent 60 hours in dance classes….

got to 99% on Brain Challenge….

hugged my daughter 730 times….

toilet trained my cat….

After reflecting on the past year, I know what my blessings are as clearly as I know everything is going to turn out great.

I’m thankful for my daughter, my brother, my parents, my friends, my guides, my supporters, my vision, my health, my atitude, my customers, my humour,  my suppliers, my teachers, my dance partners, my employers, my mentors and everyone who has crossed my path for whatever reason…..please know that every single one of you are responsible for at least two of the things I’m grateful for.

I’ve been asking on Twitter if anyone would like to hear a bit about the building of the Stargate Atlantis Wraith Queen costumes. I say ‘a bit’ because… well, it was some time ago and I don’t have pics from building the first one, but, I’ll give it my best  from what I can remember.

I had just finished a four year stint working as the head cutter in the costume shop on a show by the name of Andromeda. One of my friends was co-ordinator for SG-1 and SG-Atlantis…. yes, two distinctly different shows working out of the same costume shop! A huge job for a shop co-ordinator, but, my friend is that kind of amazing. She asked me if I’d like to come and cut as part of her huge team in her shop, and I jumped at the opportunity to work with her again.

The designer for Stargate Universe was Christina McQuarrie and she gave me the honour and challenge of executing one of her amazing designs for the Wraith Queen. This one was to be made out of a white leather, and utilized a textured pale kid leather along with white StingRay.

As I said, I didn’t have any pics of this, so I found these ones on-line to jog my memory. It seems that the top pics may be action figures… how exciting to think that one of the costumes that I built was made into an action figure!

The coat was very fitted in the top and if I recall, we padded out the bust (a common thing to do) You will notice that the top two pics have blue trim… this is not the original costume. This is someone else’s interpretation of it. The lower pic is an on-set shot and shows the more subtle contrast of the different leathers. The waist cincher was the most difficult aspect of the costume. It was cut out of stingray, which is similar to cutting through a piece of glass that is glued to leather! Very, very horrible to work with. Couple that with the fact that it was bound with leather to finish the edges…. huge job.

The contrast pieces were made out of a lovely textured leather that I backed onto another leather to add stability. They were cut into asymmetrical patterns which were then riveted together and onto the garment. Cuffs were done in the same way and they had an interesting shape on the back side. The over belt was also made in the same way.

You know, it’s funny, the amount of work, time and money that goes into one of these costumes is just amazing… especially when you take into account that I can barely make out what it was or see any of the details from the pics, and I made it! I can only imagine what someone would go through to duplicate it from guess work!

Actually, I can imagine, as I was hired once to duplicate all the dresses from the Titanic as part of a touring theatre exhibit…. I sat for hours and drew pics frame by frame from the movie and I still had to use my imagination for almost all of the backs! I’ll save that story for another post.

I just found this picture of the original costume taken by the set supervisor. It’s a really good shot that shows the details and the fact that there was no blue on the costume.

 

 

That was my only season working in the shop at Stargate… many changes happened after that….   Christina McQuarrie moved on to become the illustrious designer of Sanctuary, I started doing contract cutting from my own studio and Valerie Halverson took over as designer of Atlantis (she is now the designer on SG-Universe)

Valerie asked me to do the next Wraith Queen that I built. This was the Hive Queen, her thrown was amazing and she was all connected into it. It looked like some kind of a web/goo…. creepy….

This dress was constructed from the base up. We started with a foundation garment. I cut and stretched the two layers of fabric over the bust, and then hand stitched it onto the bra to give it stability and shape.

This dress had a centre back invisible zipper and the skirt split in the centre front and had a long train.

The pic shows what a disaster zone my apartment turns into when I’m working… actually it looks pretty good in this shot!

The outer fabric layer is a gold mesh with sequins in it. It’s really effective because of its random nature.

I was good about taking pictures of the dress, but, I didn’t get any of the building of the the outer layer. The outer layer was like a leather corset, but it was not boned. The leather was extremely stiff and didn’t need any support. It was an embossed, stiffened cow hide that had a shiny finish. The whole thing was built by draping it and stitching it as I went. I then bound all the raw edges with a soft lamb. I think this was a very strong and effective costume for the Hive Queen. Lots of make up though.

If you have any questions you can follow me on Twitter and ask away…. @BuggyBag

It’s been how many days since my last post?… Wow, 3 weeks, too long… Today, was the first full day I’ve been off in at least three weeks, but, I’m thinking that in reality it’s more like 6 weeks. I can’t really remember. What have I been doing?… I can’t really remember that either, but, I’ll try.

Let’s see… oh yeah, 26 costumes for Red Riding Hood, 9 costumes for Fairly Odd Parents, one suit, with long coat for Jim Byrnes‘ character on Sanctuary, 2 jacket linings for my friend, 10 pairs of pants for Sanctuary, 6 T-Shirt for Stargate Universe, and a skirt for myself…I draft the patterns, cut them out and construct them, so it’s fairly time consuming. As you know, I’m also working on my Buggy Bag® business, which has, for the most part been phone calls, emails, filling out forms, approving samples, Trademarks, Patents, manufacturing, Stuffed Articles Act Registrations, Duty Judgements, PO’s, Proforma Invoices, working with designers on hang tag designs, trying to line up bridge financing….shelling out much, much money…. which leads us to the real reason that I haven’t taken any time off. I need to finance my business start-up costs and, support my daughter and myself, at the same time. The build up to this falls commercial airing and it’s outcome is absolutely exciting! I have put so much into this thing… especially the wheelchair lap blanket, that I just can’t wait to get it out to more people. The feed back on last falls batch was so positive, that I just know that this falls’ line is going to be met with even more enthusiasm….it’s even better than before! The Stroller and Jogger models are really looking fantastic too. The commercial is going to focus mainly on them, with a 10 second spot on the wheelchair. The idea is to get a demographic read on the market based on the purchases made, through 150, 1 minute spots… This is going to be really interesting.

Because I work as a contractor, for the film and TV work that I do, I feel compelled to take everything I can possibly manage to do, and sometimes it gets so busy that I don’t see any time to relax… this has been one of those periods. It’s great though, because it is one of the things that I simply love doing.

Ok… well, that’s not quite true… even if I haven’t had a day off, I’ve taken many evenings to enjoy live music, dancing, friends and playing my guitar…. it’s just sometimes hard to squeeze all this fun into one lifetime!

Before I go, I just have to say that last night I went to see a Cuban band by the name of Wil Campa…. an absolutely sexy band and music… fantastic…. Which leads me to my next question… Why don’t more men learn how to dance cuban salsa? It is sooo sexy and at most events there are usually about 4 women to every guy. Last night the place was full of women wanting to dance… here is a link to a fantastic Cuban dance instructor if any of you guys want to learn… Latidos!

I’ve been so busy with costume work lately, but, not able to really talk about it too much. I’m making a leather coat at the moment, and as I was starting the sewing, I realized that, because it’s already been seen on TV, I can safely talk about what it is and what show it’s for.  It’s to replace one of the existing coats that was burned by the SPFX guys (thanks Darren!) in one of the episodes. The leather is proving to be a little more difficult than usual, in that I can’t seem to get the seams to flatten out. Usually I glue the seams down with transfer tape, but this particular leather is treated with something that is making it resist the glue. It’s also making my eyes burn something fierce! Quite strange I usually like to work with leather, but this one is not at all like most…. indeed it’s down right disagreeable!

Cutting out anything is always a challenge when the young Toopi feels that she should be involved. Usually, she’s diving under the patterns or fabric… this time she’s just acting as an extra weight.

Toopi "helps"

Here is a shot of the double jetted flap pocket during construction. The close up shows how spongey this particular leather is.

constructing the double-jetted flap pocket

topstitching underneath lower jet

you can see how thick it gets to sew through when there are many layers

The shoulder pad gives support and structure to this coat that has no canvas or fusing in it, while the lambswool in the crown of the sleeve helps to soften the head of the sleeve.

This is the collar and lapel and also shows the inner welt pocket and lining.

I just gave this back to the Assistant Designer, who will now take it to someone to do some really great heavy duty Keyhole Button Holes…  This coat weighs at least 15lbs….just a guess, based on how hard it was to wrestle it around the sewing machine! Luckily, the actor that wears it is a strapping tall fellow!

The show is Sanctuary, and the character is John Druitt, played by Christopher Heyerdahl.  The costume designer on the show is the very talented Christina McQuarrie, who has a long history in Vancouver-based Episodic TV.

Also, just wanted to add that all of the pics on this post were taken with my iPhone!

Yesterday afternoon, one of the designers that I work for brought me 3 fabrics and some measurements for a little girl. I was to make 3 different dresses, 2 of each.

Usually, you need more than one of any costume for a movie or TV show, just in case. And in most cases because there is a photo double or stunt double, lots of action, dirt or a character gets killed in a messy way.

I make a pattern based on the measurements I’m given, and the design that the designer gives me. Then I cut it out, and begin to sew it together.

Sometimes I get help from “Kitten”, and sometimes I have to try to persuade her into believing that her toys are more interesting than what I’m doing…. not always easy!

Next stage is the construction. In this case, I have to piece some old embroidery pieces onto one of the dresses. Because I have to make two dresses that look the same, and I only have embroidery from one old dress, I have to cut it all apart and piece it together so that both the dresses have the same embroidery look on them. This took me quite a while to do…. not hard, just fiddly.

Many hours later, voila…. I have 6 dresses ready for a fitting on Wednesday! This little girl is going to look so cute!

I’ve decided that I will show a bit more of this side of my work…. I’m not going to say what show it is until it’s released…. Then, I will tell you the name of the movie and the costume designer. Hope you have as much fun with it as I do making them!

I’m very excited because one of my favourite Designers to work for, Monique Prudhomme, has been nominated for an Oscar for the film “The Imaginarium of Doctor Parnassus”. It will be so thrilling to watch the Academy Awards. Last week Monique won the “Excellence in Fantasy Film” award at the 12th Annual Costume Designers Guild Awards.

buggy bag® mobility products

Buggy Bag® Mobility Products is dedicated to helping loved ones stay warm and dry while on the go. Buggy Bag® Stroller, Jogger and Wheelchair blankets protect against the cold and wet, while offering visibility in low light conditions.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 2,718 other followers

del.icio.us

Tweets

Twitter

Follow BuggyBag on Twitter

Time Lines

December 2018
M T W T F S S
« Dec    
 12
3456789
10111213141516
17181920212223
24252627282930
31  

buggy bag®

Advertisements